Smoovie (Mac & iPad) Featuring precision editing, onion skinning, chroma key effects, direct-to.
If you’re familiar with movies like Wallace and Gromit or those groovy Lego shorts on YouTube, then you’re probably already familiar with stop motion. Stop motion (also known as stop action) is an animation technique to make any object you choose to appear to move on its own. The object is moved or manipulated slightly in small increments and captured in individually photographed frames. This creates the illusion of movement when a series of frames is played as a continuous sequence. Ready to start with your first stop motion animation?'
First get objects and figures to “star” in your movie. Good choices include clay, bendable wire, Lego® or similar building block figures, Playmobil® figures, small dolls with a lot of flexibility, or string and wooden bead characters – really almost anything. Set up the figures (characters) in a particular position on your stage or set. Click the ‘+‘ icon located in the welcome screen or select “New…” from the “File” menu to start your first project.
Selecting a capture source is the first step when creating a new movie. The capture source defines where the images for your movie come from. This could be either a camera connected to your computer like a webcam, a DSLR camera connected by USB, a remote camera device connected by a Wi-Fi, your computer screen or a local folder on your computer. Select the capture source in the project properties capture source panel. Scroll down to get more information on each available capture source.
Place your camera in front of the “set” that you are going to photograph. Check to make sure the entire frame is in view. It is very important to make sure the camera is firmly supported so it doesn’t shake as you shoot each frame. Otherwise, the end result will appear jumpy and lack continuity. Keep in mind that the more frames you capture, the smoother the results will appear in your final video. 24 frames are equal to one second of the film. Click the “Capture” button or hit “Enter” on your keyboard to capture an image. If you can’t see a live image you may have to select your camera from the capture source menu first.
Begin shooting the stop motion sequence. Move each figure bit-by-bit in very small increments each time. It may be the entire body if the figure is walking, or it may just be an arm, head or leg. If you are moving only one body part and you find that the figure is tilting or threatening to fall over, make use of poster tack or stickum under the feet or other area touching a part of the set. Repeat the movement sequence until your action step is completed.
The live view is a live image feed from your capture feed. This allows for a precious lineup with the previous frame. Please bear in mind some capture sources do not support a live view. To see the live view either change the overlay opacity or move the playhead to the capture frame.
A pink colored border around the preview indicates that you are looking at the live view. A yellow colored border indicates you are looking at a test shot taken. If you can’t see any border that means you are looking at a regular image.
The built-in timer will help you snap pictures automatically at a given interval. Click the timer button use the timer. You can change the time interval at any time within the project properties. You can choose between 5 and 90 seconds. Click the timer button to enable or disable the timer.
The playhead is a vertical line, with a triangle shaped head that indicates the current position in your movie. It is positioned in and above the timeline. You can move the playhead by dragging the triangle or click on a frame within the timeline.
The frame counter displays either the frame number or the time index of the playhead position. If you move the playhead the frame number or time index will reflect the new position. A click on the frame counter will let you switch between frame number and time index. You can also open the clapperboard window from the window menu to see the frame counter.
The capture frame is a special frame within your timeline. It has a camera icon on it. The capture frame is a placeholder for the next image you capture. If you move the playhead to the capture frame position you can see a live view from your capture source. The frame counter will tell you the frame you are about to capture.
Use the Overlay slider to help you position animated objects more easily and precisely. The overlay (also known as onion skin) shows the last captured image. The slider control allows you to change the opacity of the previous image. For a steadier and continuous animation, you can change the number of frame layers in the project properties onion skin section to see up to five frames at once.
Blinking toggles between the live image view and the current frame to help you to see differences. You can adjust the blinking speed in the project properties blinking panel.
The panel allows you to set up most of your ** project properties**. Open the panel by clicking the rightmost button. Here you can configure the capture source, i.e. what camera you want to use, add themes and credits and much more.
If you feel your movie is playing to fast you may want to change the speed of your movie. The speed is defined as frames per second or FPS. Keep in mind that the more photos you shoot, the smoother the video will be. A lower FPS may look unsteady but will not require a lot of images. A higher FPS will look much more professional but you may have to capture a whole lot more images.
The unique timeline shows you all the images you took in chronological order, much like the single frames of a movie. You can click a frame to see the picture or scroll around to see all the images you’ve captured. A click on a thumbnail will also open the frame edit menu where you can copy, paste, delete and edit the frame. Don’t forget when holding down the ‘Shift’ key you can select multiple frames. With the slider below the timeline you can zoom-in or out of the timeline.
The symbols on each thumbnail show more information for each frame in your movie. The ‘Pause’ symbol appears if you pause a frame. The ‘Audio’ symbol shows you that the frame has an attached audio clip and the ‘Text’ symbol will let you know that you can edit the text for that frame.
If you shot a frame you don’t like or one that jiggled, you can easily delete it.** Click a thumbnail** to open the frame edit menu. In the frame editor you can edit, delete or hold a frame. You can also drag and drop frames either within the same project or even between different projects.
Want a frame to be displayed for a few seconds? You can do so one of two ways: you can either capture the image several times in succession; or just choose the pause option. Pause a frame is the same as copying and pasting the frame multiple times. Click a thumbnail to open the frame editor menu and then select “Pause”. Select how long you want to pause the frame. If you mess up, you can change or adjust the image duration at any time. You can also pause a frame for the duration of the associated audio clip.
Stop Motion Studio allows defining in and out points. The in point marks the beginning of the playable section. The out point marks the end of the playable section. The playable section will be highlighted. When you press play while having a playable section only the frames within the playable section will be used during playback. Defining a playable section is a great aid to create a steady animation. You can change or remove in and out points at any time using the menu or the associated keyboard command. You can also simple click on the frame number to set an in- or out point.
The ‘Short Play’ plays only the last frames you have captured. By default, Stop Motion Studio will play the last 12 frames before the image capture frame. You can change the number of frames in ‘Short Play’ mode within the project properties->preview panel.
The histogram panel in the project properties contains a histogram of the selected image. A histogram is a graphical representation of the tonal distribution. Use the histogram as an aid whether image detail has been lost to blown-out highlights or blacked-out shadows.
Within the mask panel you can add several overlay option as a visual guideline for your movie. Select an aspect ratio mask over the preview to visualize how images might look cropped. By default, Stop Motion Studio applies a 16:9 aspect ratio mask. This is the standard format of HDTV, Full HD, non-HD digital television and analog widescreen television. Adjust the opacity of the mask with the mask opacity slider below the mask selection.
The preview panel allows you to change the background brightness of the preview section to help you see images edges.
You can also change the fill mode. The fill mode defines how images are scaled if the aspect ratio is different from your selected movie aspect ratio. In fill mode ‘Fill’ the app will resize the image aspect ratio correct to fill the whole screen. In fill mode ‘Fit’ the app will no resize the image at all but rather leave blank space around the image. The fill mode settings will be used for the rendered movie as well.
The ‘Quality’ controls the default image quality used in the preview. The default option uses a lower resolution image for live playback in order to keep video and audio playback in sync. Switching to ‘Full Resolution’ may result in frame drops during live playback. The quality option does not change the image quality in the final movie. Stop Motion Studio always uses full resolution images for rendering.
Add movie titles and credits using different themes. You can add awesome looking titles and credits to your movie using the ‘Theme’ section within the project properties. Select a theme and go to the outline section to enter your movie credits.
Use the outline section to personalize your movie. You can customize elements such as the cast list, the studio and the movie name. Start by changing the movie name. After you have filled in all the blanks don’t forget to click the update button below the outline to apply the changes. If you don’t see the credits screen yet, you may have to select a theme first. Select a theme from the theme section to add a movie theme.
Add theme and text cards to visualize scene effects or add speech bubbles. Click the ‘+’ symbol and select ‘Theme Cards’. Select a theme card to be inserted into your movie. If the theme card can have text the text symbol will appear in the frames thumbnail. Click it to open the frame editor menu and select ‘Text’ to add or change the text.
Within the ‘Theme’ section you can also choose a foreground image. The image will be in the foreground of your entire movie. Use it to simulate a scene underwater or in space.
This is a really awesome feature that professionals use all the time. Using Green Screen, you can change the background of your scene to make the figures you capture fly or appear anywhere you can imagine – just by changing the background image. But first, you’ll need to find something solid green or blue as background for your master shot. Try a green bed sheet or towel. Also make sure you have enough light. Place your figures in front of the green background.
Enable “Chroma Key” in the project properties chroma-key panel. The green portion on the screen should now be showing the picture you selected with the figure(s) you are shooting in front of it. If you can still see parts of the green background showing through, try to adjust the sensitivity slider a little bit until your background picture appears clearly with no artifacts.
Use the background control to change the background picture or select ‘Import’ to import your own background image.
You can stylize your movie to add an extra touch of creativity by applying one of seven amazing effects. You’ll find the movie effects in the ‘Theme’ section. The preview playback may skip some frames on low-speed devices in order to keep the audio in sync if movie effects are used.
description: The fade-in and fade-out options control the transition at the beginning (fade-in) and the end (fade-out) of your movie from a black image giving your movie a more professional look. The fade options are located in the “Theme” section of the project properties.
You can import pictures into your movie with a single click. You can also copy and paste images between applications or paste images directly into the timeline. Click the ‘+’ add media symbol and select ‘Add Images’ to add pictures. Select the images or a folder with images. Depending on the number of pictures chosen, it may take a few minutes to import all the images. Adobe flash plugin for mac.
You can also change the order later on in the timeline. Either drag and drop the images in the correct order or use the reverse feature. Hold down the ‘Shift’ key while selecting the images. Click a thumbnail to open the frame editor menu and select ‘Reverse’.
Now it’s time for the finishing touches. To add music or sound effects, click the ‘Add Media’ button. You can add sound effects or music. If you feel like changing or removing the audio, just tap the thumbnail in the timeline and select ‘Audio’. This will open the audio editor. Here you can trim your audio clip. Perhaps you want to shorten the audio to fit the timing of your scene. To trim the beginning of the clip, move the left marker next to the audio clip. To trim the end of the clip drag the marker on the right next to the audio clip to the desired ending position for the audio clip. You can also move the middle part within the audio clip. If you feel the audio clip is to loud you can change the volume of that clip with the volume slider. To check volume and timing, click the play symbol.
If you want to remove the audio clip all together click the remove button to remove it. Please bear in mind, if you add another clip to the frame it will replace the current audio clip. Need to add two clips to a frame? Don’t worry just use the frame next to it. You won’t hear the difference.
Create movies in Ultra High Definition with four times the resolution of Full HD. Requires a 4K capable device. Please bear in mind Ultra HD will significantly increase storage space needed. Some features may not be available when using Ultra HD resolution. To create a video in 4k Ultra HD select ‘4K Ultra HD‘ when exporting the movie.
Use the built-in timer to capture a time-lapse sequence. First setup up the capture interval. Open the project properties panel and scroll to ‘Time Lapse’. Enter the capture interval you want to use. The interval defines the time between two shots. The default is 5 seconds. That means the app will capture an image every five seconds. If you want to capture an image every minute, select ‘Minutes’ and move the interval slider to 1.
Make sure you select an interval that gives the app enough time to capture, download and process the image. For example, some DSLR cameras need up to 10 seconds to focus and capture an image. To start and stop the time-lapse recording click the ‘Timer’ symbol next to the ‘Play’ button.
Stop Motion Studio supports DSLR (digital single-lens reflex camera) cameras with and without live view output, also called EVF (electronic viewfinder). Before connecting the camera read the manufactures setup instructions. Connect your DSLR camera using a USB cable. Set the camera to ‘Manual’ shooting mode. Turn on the camera and make sure no other application is accessing the camera at the same time. Select the camera from the capture source dropdown box. Please bear in mind it takes up to a minute for Stop Motion Studio to recognize the camera.
If your camera supports the live view you should see a live image feed from the camera when selecting the capture frame. If your camera does not support a live view use the ‘Test Shot’ button to capture a test image. This will help you to align your animation.
Additionally, you can control your cameras shutter speed, aperture and ISO from the capture source panel. Adjust each value using your mouse to select the desired setting. Troubleshooting: If you have trouble getting your DSLR camera to work try the following steps in the precise order. Remove all other attached USB devices. Start the Stop Motion Studio app. Turn off the camera and connect it to the computer. Wait 30 seconds until the camera is available in the capture source drop-down box. If you don’t see the camera make sure no other app is accessing the camera at the same time. Disable autostart for the Photos and Image Capture system app. If this doesn’t help power the computer off and on again. S top Motion Studio features an auto reconnect. If the camera connection gets lost i.e. the camera turns off, the app will reconnect to the device as soon as it becomes available again. Please allows up to 30 seconds for that.
Get a new perspective! Use your mobile device as a remote camera connected via a WI-FI connection. First download the Remote Camera app from the AppStore and start it. The remote camera app is also available for Android and Windows devices. You can use multiple remote camera devices. Each remote device will appear with their name in the capture source menu. Go here to find more information about the remote camera.<
If your remote camera device is not recognized automatically use the manual remote camera option. This applies to Android and Windows devices. First select the ‘Remote Camera (Manually)’. Click the ‘Configure’ below the capture source drop down to configure the remote camera. Enter the remote camera address as shown in the remote camera app in the address field. Click ‘Connect’ to connect to the remote camera device. If the connection was successful you will see a live view feed from the remote camera device.
After you have established the remote camera connection you can adjust focus, exposure and white balance within the capture source panel. You can also switch between front and rear camera. Please bear in mind, depending on the remote camera device, not all options may be available to you.
Instead of using a real camera you can use the screen capture feature to create great looking tutorials and presentations. Select ‘Screen’ from the capture source dropdown. After that click the ‘Configure’ button to select the portion of the screen you to capture.
The ‘Folder Watch’ capture source is a great tool if your camera is not supported by Stop Motion Studio. This way, even if your camera is not supported, you can still use the program to capture images. The ‘Folder Watch’ capture source will detect any new image uploaded to the folder watched. To set up the folder where ‘Folder Watch’ watches for images click the ‘Configure’ button below the capture source drop down box and select the folder. Stop Motion Studio will import images from this folder. The content of the folder will not be altered.
Stop Motion Studio is designed to be easily controllable by keyboard. Many controls supporting keyboard commands. You can also use your numerical keypad to control the most used functions like capturing images, playback or blinking. Open the keypad overview from the windows menu.
By default, the program will save your movie project continuously every five minutes. You can disable autosave or change the time interval within the app preferences panel. You can also disable interface audio feedback in the preferences panel. With audio feedback disable you won’t be able to hear capture sound, timer sound or any other audio feedback.
Now that you’ve finished your masterpiece, it’s time to share it with the world. Just select ‘Movie’ from the ‘Share’ menu. Choose the export quality and select ‘Share’ to save the video to a folder. From there you can upload your video to YouTube, Facebook, Dropbox and co. When exporting the video you can select the video format to exclude the audio, the fill mode and the quality. The fill mode defines how the app scales or crops images that does not fit the selected format. Make sure when exporting non-square pixel video to select ‘Strech’ as fill mode i.e. NTSC or PAL.
You can not only share the video you can also export the whole project to the mobile device of the app. Or export the movie as animated GIF. If you need the all the single frames as numbered images you can export that as well. Just choose ‘All Images’. Another option is to export or print the movie as flip book. A flip book allows you to flip through your animation with your fingers.
You can import and export projects from any mobile version of Stop Motion Studio. You import and export your project to and from the mobile version of the app. Stop Motion Studio is available for iOS, Android and Windows.
To import a project from the mobile version of Stop Motion Studio double click the project icon first. This will open Stop Motion Studio with the import dialog screen. You can also open a mobile project from the ‘File->Import’ menu. The program will convert the mobile project to the desktop version of Stop Motion Studio. Click the ‘Save’ button to select a folder where the program will store the converted project. After the project has been converted the program will open it automatically. At this point forward the mobile project file is no longer needed.
If you have any questions about using Stop Motion Studio, please email us at [email protected]
If you are looking for a software solution for stop motion animation, you should go only for the best Claymation software. The main function of the computer program is to manipulate objects by creating illusions of movements, making the objects appear to move on their own. Of course, there are many tools available online today, and that means you can’t just settle for any. You need to choose a solution that is going to work best for you, so let’s review a couple of solutions that you may find helpful.
Developers look for software solutions that can help them create the best free stop motion animation from start to finish without any struggles, and Free Stop Motion software is the best solution to use. It comes with unique features, and the better part is that you can get it all for free.
Do you have the zeal to create the best-animated films but have no idea what’s the best solution for it? Well, you might want to try Stop Motion Pro, the best animation software created for professional, creative stop animation developers. Stop Motion is a Windows OS solution, and it connects with digital cameras and webcams.
Bring your animation project to life with Zu3D. By using this software, you have the freedom to create an amazing animation that will absolutely wow any viewer. Zu3D has powerful feature for three-dimensional designs, and you can use it to create the best Claymation stop animation either at school or at home.
Anima Shooter is the solution that you can use to create the best stop animation. Apparently, there are two Anima Shooters: Anima Shooter Capture and Anima Shooter Pioneer. Each software solution has its own price tag, but not to panic, they are relatively cheap, and you even have a 14-day trial to decide whether to buy the software or not.
If you are looking for additional programs that work on other Operating Systems, you will be glad to know that developers from different parts of the world have created the best solution for you. So, if you are on a Mac or Linux Operating System, be sure that the following software solutions will be of great help to you.
Animation DH is a suitable stop animation tool for those who would rather not use Linux of Mac Operating Systems. The software supports HDMI-HDV, DV, pretty much all the analog sources, High Definition Cameras, Digital Still Cameras, and 16 mm & 35 mm cameras. Further, it features the onion skin mode with a friendly user interface.
The iStopMoion 3 for Mac is the software that will blow away your mind. It features instant playback options, tilt-shift filters, foreground, and the chroma keying. What’s, even more, is that iStopMotion 3 features Onion Skinning, which means you can get the clear picture of what an animation will look like before you capture the frame.
Dragon Frame is the most popular software for 2016. The solution not only has a friendly user interface but also comes with all the tools you need to create the best stop animation motion. From doing an image review and perfecting your focus to chroma keying and camera control. You can be sure that Dragon Frame will never disappoint. You can also see 2D Animation Software
Claymation Software is computer programs developed to help you create the best stop motion animation from scratch. Some solutions are free; that means you can download them for $0.00 and use them as long as you like. Some software solutions, like the Anima Shooter, will cost you, but the developers always provide a trial period during which you can use the software to see whether it meets your needs. It is important to note that the purchase you make is almost always one-time. You can also see 3d Animation Software
When you talk about animation, people like to think about sliding images and the best movies whose characters are not human. Well, that’s just about it. The biggest goal of each software, therefore, is to help you, the animator, to create the best movie projects.